Bucket elevator conveyor belt has the advantages of large conveying capacity, simple structure, convenient maintenance, standardized components, etc. Today, let's learn what the safety operation rules of bucket elevator conveyor belt are.

1. Before operating the mobile belt conveyor, the traveling wheels should be wedged symmetrically into the triangular wood. Fixed belt conveyors should be installed on a solid foundation.
2. Before starting, adjust the tightness of the reducer, the retaining ring should be firm, the transmission parts such as bearings, gears and chains should be in good condition, the supporting wheels and protection devices should be complete, and the electrical grounding (zero) should be zero. The bucket elevator conveyor belt manufacturer tells you that after protection, the width of the conveyor belt and the drum should be the same.
3. It should start with no load first. After normal operation, it can be loaded evenly. It must not be started after loading.
4. During the operation, attention should be paid to the operation of the machine. Bucket elevator conveyor belt manufacturers tell you to stop and adjust or repair if you find that the conveyor belt is loose or deviated. Repairs and adjustments during operation are strictly prohibited.
5. During operation, it is strictly forbidden for anyone to pass through the conveyor belt under the belt conveyor or through the belt conveyor. Do not shake by hand when the conveyor belt is slipping.
6. When transporting bulk materials, protective devices, such as baffles or fences, should be installed on both sides of the conveyor belt.
7. When the machine needs to be stopped during operation, the charging should be stopped first, and then the material can be stopped after unloading the material.
8. Bucket elevator conveyor belt manufacturers tell you that if there is a sudden power failure or other reasons, the power supply should be cut off immediately, and then the material on the belt should be removed. After a call or troubleshooting, power up and get started.
9. Before parking, you must first contact the relevant parties, and then completely remove the material on the conveyor belt.
10. After shutdown, the power should be cut off, the power switch box should be locked, and all parts of the machine should be maintained. The bucket elevator conveyor belt manufacturer tells you to cover the motor with a rain cover.