Luwei
Keywords:
There are two types of elevators used in asphalt plants: one is for conveying stone materials, abbreviated as 'bone lift', and the other is for conveying powder materials, abbreviated as 'powder lift'. The NSE series specially equipped elevators are adopted, offering reliable lifting performance, minimal environmental pollution, easy installation, and a long service life, equivalent to that of the asphalt plant.
Keywords:
The steel wire belt (TGD) elevator traction component uses a high-strength steel wire rope core belt, overcoming the dynamic load generated by the drive during the meshing of the chain and sprocket. Compared with chain lifting, it is lighter, runs more smoothly, and can achieve higher productivity at a faster running speed. Under the same production conditions, due to its fast working speed and light weight, the belt can reduce the material line load and the line load of the traction component, thus reducing the size and weight of the whole machine. At the same time, because the belt has good elasticity and flexibility, it has a damping effect when the bucket is loaded. Due to the use of high-strength steel wire rope core belt, the lifting height and conveying capacity of the elevator can be greatly improved, so this product has good development prospects.
Keywords:
Air slide chute is a pneumatic conveying equipment used for conveying dry powdery materials. It is commonly used in the cement industry for conveying cement and raw meal powder. Air slide chutes are widely used in material conveying because they have no rotating parts, are easy to maintain, have good sealing, are noiseless, operate safely and reliably, consume less power, are convenient for changing conveying direction, and can feed and discharge at multiple points. The main component of the air slide chute is the permeable layer. The air slide chute adopts PETS-6 (polyester) type synthetic fiber fabric, which is a new type of permeable material. It has advantages such as high temperature resistance (up to 150℃), corrosion resistance, wear resistance, low hygroscopicity, light weight, flat surface, and long service life.
Keywords:
A cement screw feeder is a device used for handling cement materials. The overall structure is relatively simple, the conveying performance is stable, and the manufacturing cost is low. It is a commonly used conveying equipment in many concrete mixing stations, asphalt mixing stations, dry powder mortar production lines, etc. In addition to conveying cement, it can also convey sludge, sand, flour, salt, etc. It is used in chemical, grain, building materials, and power industries. During conveying, it should avoid material flying, not affecting the use environment, and saving materials. It can add materials from one or more inlets, which is convenient to use; if the conveying environment permits, it can be used as a lifting conveying equipment. As the inclination angle of the equipment increases, the amount of material conveyed will also decrease. The screw diameter of the cement screw feeder is small, the speed is high, and the conveying capacity is strong. It mainly consists of a motor, gearbox, inlet and outlet, casing, connecting flange, liner plate, and top cover. The casing is made of seamless steel pipe and connected by flanges. It has good rigidity, strong bearing capacity, and can be used for horizontal and inclined conveying. The gearbox adopts a gear reducer, which has a large torque, low noise, no oil leakage, and a long service life.
Keywords:
Latest product
Latest News