Image name

Solution


Luwei products ——Bucket Elevator Introduction


Plate chain vertical bucket elevator(high speed NSE type/NE type)

 

Applications and characteristics

  1. The plate chain vertical bucket elevator can be used to lift various materials, including: ore, crushed stone, machine-made sand, coal, cement clinker, etc. It has a wide range of applications and less requirements on the types, characteristics and lumpiness of materials. Not only can improve powdery, granular and block materials, but also can upgrade materials with greater abrasiveness, and can upgrade materials with a temperature less than or equal to 250°C, and has a large conveying capacity, the lifting capacity can reach 800m³/h.
  2. The lifting height is high, the chain speed of this series hoist is low, so the operation is stable, and the plate chain type high-strength wear-resistant chain is adopted, so it can reach a higher lifting height (up to 50 meters).    

 

Good rigidity and long service life

The plate chain vertical bucket elevator adopts inflow feeding, and there is little squeezing and collision between materials. The design of this machine ensures that the material will not be sprinkled during feeding, lifting and unloading, which can prevent the material wear. The conveyor chain adopts a plate-chain type high-strength wear-resistant chain, which prolongs the service life of the chain and the hopper;High structural accuracy and shell flange welding make a better rigidity and appearance.

 

Energy saving and environmental protection

The plate chain vertical bucket elevator adopts inflow feeding, gravity-induced discharge and adopts densely arranged large-capacity hopper conveying, lowly speed and large lifting capacity, when the material is lifted, there is almost no return phenomenon, so the driving power is small, its shaft power is 25%-45% of the chain hoist after the theoretical calculation; Reliable sealing structure and less pollution to the environment; The advanced design principles ensure the reliable operation of the whole machine, more than 30,000 hours of trouble-free operation; Convenient operation and maintenance, few wearing parts, energy saving and maintenance, and low use costs.

 

 

Technical parameters

 

Plate chain vertical bucket elevator(high speed NSE type) technical parameters

 

Note: It is suitable for powdery, granular, small block non-abrasive, semi-abrasive materials with a bulk density of less than 2.2t/m³, and the temperature less than 250°C.

 

Plate chain vertical bucket elevator (NE type)technical parameters

 

 

Note: It is suitable for medium and large block non-abrasive with a bulk density of less than 2.2t/m³, and the temperature less than 250°C.

More solutions


Batching plant bulk material transfer scheme

In batching plant systems, assembled steel silos are often required as intermediate storage containers for ingredients. Bulk materials are transported to these assembled steel silos by bulk trucks, belts, etc., and then conveyed to the weighing scales via screw conveyors, belt conveyors, etc., for mixing.


Factory Bulk Material Storage and Conveying Solutions

Factory bulk material storage and conveying solution: Raw materials arrive at the factory by bulk trucks or other means, and are conveyed to the raw material storage silo via dump-lift or compressed air. They are then transported to the metering equipment via belt conveyor or screw conveyor. After precise metering, they are mixed or bagged, and sent to the finished product storage silo via discharge equipment, or bagged for sale after packaging by an automatic packaging and palletizing machine.


Hydropower project bulk material transfer scheme

New hydropower projects are usually built in relatively remote areas, making it difficult to transport raw materials such as cement, fly ash, and sand and gravel. Large-capacity prefabricated steel plate silos are usually needed for centralized transportation, allowing for a single delivery to cover a longer period. The materials are then directly transported to the point of use via inclined belts, pneumatic conveying, and other methods.


Train Bulk Material Transfer Scheme Diagram

Bulk materials are delivered to the site by train, and then transported via pneumatic conveying/belt conveying/screw conveyors and elevators, etc., to assembled steel silos for storage. From there, they are distributed to various locations in the region by tanker trucks, or connected to a bagging machine for sale as bagged materials, or transported by truck to the point of use.


Port Bulk Material Transfer Station Solution

Bulk materials arrive at the terminal by water, and are then transported to assembled steel plate silos for storage via pneumatic conveying, belt conveying, ship unloaders, bulk truck transfer, chutes, elevators, etc. Afterwards, they are distributed throughout the region by cement tankers or connected to packaging machines for sale as bagged materials.


Mine Bulk Material Storage and Transportation Solution

Ore raw materials are transported through mining to raw material storage silos or stockyards, then transported via conveyor belts to crushing machinery (coarse crushing, fine crushing), and then transported by belt conveyors/hoists or other means to finished product storage silos or processing equipment, finally transported by truck or packaged for sale. If necessary, the crushed granular material is then ground into powder by a pulverizer and transported to the finished product warehouse, then sold via bulk trucks or after packaging.