Solution
Do you know the installation measures of bucket elevator for cement plant
Release time:
2023-03-13 11:14
Source:
Bucket elevator for cement plant is the most common mechanical equipment that conveys vertically from low to high, and can transport powdery, granular or small lump materials. Whether the installation of the bucket elevator meets the professional technical requirements is of great significance to the later operation of the equipment. Today we will learn more about the installation measures of bucket elevator for cement plant.
Box installation:
The installation of the bucket elevator for cement plant box structure needs to be carried out at the cement plant site, the head assembly is completed before leaving the factory, and the rest of the parts need to be installed after arriving at the cement plant.
(1) The platform structure of the bucket elevator box body is divided into two parts: the overall platform and the split platform. The railings and hangers of the overall platform are welded on site. The split platform is transported first and then assembled and welded. The split platform is welded on site. The supporting structure is installed in the order of platform, support, guardrail and hanger.
(2) The installation of the shell structure of the bucket elevator for cement plant, the installation sequence is the tail, the first section of the shell, and the middle shell. stability.
(3) When installing the head of the bucket elevator, first check the assembly method of the head shell before installing, install the head shaft after the head shell is installed, and adjust the deviation in the head shaft to ensure that the head shaft is consistent with the bucket elevator. The rationality of the hoist head housing. After the position of the head shaft is determined, the verticality of the tail shaft and the shell should be adjusted based on the head shaft to ensure that the verticality control is within the allowable range.
(4) Adjust the levelness of the head axis only after the verticality is adjusted.
(5) Since the head is connected to the transmission, special attention should be paid to the reinforcement of the head shell during the installation process to ensure the one-way deviation caused by the driving device during the operation of the equipment.
Cement plants generally use large bucket elevators. Large bucket elevators have an independent drive structure. The installer uses a coupling to install the drive device to the head of the bucket elevator. It can also be adjusted according to the actual situation of the cement plant The case adopts the method of the sprocket connection or the pulley connection. The motor and coupler of the bucket elevator for cement plant are installed and debugged before leaving the factory. After the drive installation is completed, the installed accessory equipment needs to be debugged to improve the overall effect of the bucket elevator installation in the cement plant.
Transmission chain and hopper installation. After the box body, head and tail shafts and drive are installed, the conveyor chain and hopper can be installed.
During the trial run of the bucket elevator for cement plant, check whether the installation of each part is reasonable. The time for the no-load trial run should not be less than 2 hours. The on-site staff will monitor the installation status of the bucket elevator and record the location and time of the abnormality. After rectification, the bucket elevator can only be operated normally in the cement plant after it can reach the operable standard.
More solutions
Batching plant bulk material transfer scheme
In batching plant systems, assembled steel silos are often required as intermediate storage containers for ingredients. Bulk materials are transported to these assembled steel silos by bulk trucks, belts, etc., and then conveyed to the weighing scales via screw conveyors, belt conveyors, etc., for mixing.
Factory Bulk Material Storage and Conveying Solutions
Factory bulk material storage and conveying solution: Raw materials arrive at the factory by bulk trucks or other means, and are conveyed to the raw material storage silo via dump-lift or compressed air. They are then transported to the metering equipment via belt conveyor or screw conveyor. After precise metering, they are mixed or bagged, and sent to the finished product storage silo via discharge equipment, or bagged for sale after packaging by an automatic packaging and palletizing machine.
Hydropower project bulk material transfer scheme
New hydropower projects are usually built in relatively remote areas, making it difficult to transport raw materials such as cement, fly ash, and sand and gravel. Large-capacity prefabricated steel plate silos are usually needed for centralized transportation, allowing for a single delivery to cover a longer period. The materials are then directly transported to the point of use via inclined belts, pneumatic conveying, and other methods.
Train Bulk Material Transfer Scheme Diagram
Bulk materials are delivered to the site by train, and then transported via pneumatic conveying/belt conveying/screw conveyors and elevators, etc., to assembled steel silos for storage. From there, they are distributed to various locations in the region by tanker trucks, or connected to a bagging machine for sale as bagged materials, or transported by truck to the point of use.
Port Bulk Material Transfer Station Solution
Bulk materials arrive at the terminal by water, and are then transported to assembled steel plate silos for storage via pneumatic conveying, belt conveying, ship unloaders, bulk truck transfer, chutes, elevators, etc. Afterwards, they are distributed throughout the region by cement tankers or connected to packaging machines for sale as bagged materials.
Mine Bulk Material Storage and Transportation Solution
Ore raw materials are transported through mining to raw material storage silos or stockyards, then transported via conveyor belts to crushing machinery (coarse crushing, fine crushing), and then transported by belt conveyors/hoists or other means to finished product storage silos or processing equipment, finally transported by truck or packaged for sale. If necessary, the crushed granular material is then ground into powder by a pulverizer and transported to the finished product warehouse, then sold via bulk trucks or after packaging.
Xiamen Luwei Prefabricated Steel Structure Co., Ltd.
Scan the code to add us on WeChat.
Zhixiang’s Video Account
Zhixiang Official Account
Xiamen Luwei Prefabricated
Steel Structure Co., Ltd Ltd.
Service Hotline:
Domestic Sales (Manager Wu): 0086 18059271069
International Sales (Manager Tina): 0086 18150889219
Email:sales@xmlwjx.com
Company registered address:
3rd Floor, Office Building, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
R&D and Manufacturing Address:
Factory, 2nd Floor, E, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
