Solution
How can bucket elevator conveyor achieve better dust removal effect
Release time:
2022-04-12 17:08
Source:
With the country's high standards for environmental protection, problems such as bucket elevator conveyors must be avoided, otherwise we will have unnecessary troubles. The following editor will give you a detailed description.
1. Since the bucket elevator conveyor is a closed structure, the dust generated from the base side of the body depends on the physical properties of the material, but even the materials that are prone to dust will not float in the dust when entering the elevator. In addition, we installed a dust removal device inside the fuselage, located in the middle of the barrel. In fact, the dust collection effect of this layout is not very good, but the dust pollution itself is not serious. So many people don't care. So far, we have found that this layout not only has poor dust removal effect, but also affects the transportation capacity of the bucket elevator conveyor.
2. A large amount of material is accumulated on the base of the body, which affects the air circulation and forms a negative pressure area at the entrance. The hopper runs up around wheels on the bottom, which affects the loading of the material. Later, we proposed two improved dust removal methods according to whether the feeding direction is forward or reverse, but the principle is that the packing around the hopper is in the positive pressure zone.
Bucket elevator conveyor is widely used because of its large lifting capacity, high lifting height and stable operation. With the wide application of bucket elevator conveyors, manufacturers continue to innovate and improve production processes and equipment to make better use of equipment.
More solutions
Batching plant bulk material transfer scheme
In batching plant systems, assembled steel silos are often required as intermediate storage containers for ingredients. Bulk materials are transported to these assembled steel silos by bulk trucks, belts, etc., and then conveyed to the weighing scales via screw conveyors, belt conveyors, etc., for mixing.
Factory Bulk Material Storage and Conveying Solutions
Factory bulk material storage and conveying solution: Raw materials arrive at the factory by bulk trucks or other means, and are conveyed to the raw material storage silo via dump-lift or compressed air. They are then transported to the metering equipment via belt conveyor or screw conveyor. After precise metering, they are mixed or bagged, and sent to the finished product storage silo via discharge equipment, or bagged for sale after packaging by an automatic packaging and palletizing machine.
Hydropower project bulk material transfer scheme
New hydropower projects are usually built in relatively remote areas, making it difficult to transport raw materials such as cement, fly ash, and sand and gravel. Large-capacity prefabricated steel plate silos are usually needed for centralized transportation, allowing for a single delivery to cover a longer period. The materials are then directly transported to the point of use via inclined belts, pneumatic conveying, and other methods.
Train Bulk Material Transfer Scheme Diagram
Bulk materials are delivered to the site by train, and then transported via pneumatic conveying/belt conveying/screw conveyors and elevators, etc., to assembled steel silos for storage. From there, they are distributed to various locations in the region by tanker trucks, or connected to a bagging machine for sale as bagged materials, or transported by truck to the point of use.
Port Bulk Material Transfer Station Solution
Bulk materials arrive at the terminal by water, and are then transported to assembled steel plate silos for storage via pneumatic conveying, belt conveying, ship unloaders, bulk truck transfer, chutes, elevators, etc. Afterwards, they are distributed throughout the region by cement tankers or connected to packaging machines for sale as bagged materials.
Mine Bulk Material Storage and Transportation Solution
Ore raw materials are transported through mining to raw material storage silos or stockyards, then transported via conveyor belts to crushing machinery (coarse crushing, fine crushing), and then transported by belt conveyors/hoists or other means to finished product storage silos or processing equipment, finally transported by truck or packaged for sale. If necessary, the crushed granular material is then ground into powder by a pulverizer and transported to the finished product warehouse, then sold via bulk trucks or after packaging.
Xiamen Luwei Prefabricated Steel Structure Co., Ltd.
Scan the code to add us on WeChat.
Zhixiang’s Video Account
Zhixiang Official Account
Xiamen Luwei Prefabricated
Steel Structure Co., Ltd Ltd.
Service Hotline:
Domestic Sales (Manager Wu): 0086 18059271069
International Sales (Manager Tina): 0086 18150889219
Email:sales@xmlwjx.com
Company registered address:
3rd Floor, Office Building, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
R&D and Manufacturing Address:
Factory, 2nd Floor, E, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
