Solution
Vertical bucket conveyor operation precautions
Release time:
2023-01-31 17:59
Source:
The structure of the vertical bucket conveyor flat top chain is very simple, only a plate chain with hinges on both sides and a pin shaft. One side of the hinges on both sides is fixedly connected with the pin shaft, which is called a fixed hinge. On the other side, the hinge in the inner gear is rollingly connected with the pin shaft, which is called a movable hinge. The movable hinge and pin constitute the hinge of the flat top chain. The following will take you through some precautions in operation.
Notes on vertical bucket conveyor operation:
1. The bucket elevator is maintained and managed by personnel, and the key of the power switch box is managed by personnel.
2. The vertical bucket conveyor must have a hoist limiter and a stroke limiter. The limiter should make the pulley stop automatically when it is lifted to 300mm from the drum or pulley.
3. The hoist should have a load mark, and the weight must not be overloaded (1T) when lifting or lowering.
4. After power transmission, check the hoisting limiter, travel limiter, interlock switch and other safety devices, the action is sensitive and reliable, and carry out a trial hoisting.
5. Before hoisting and landing, you can drive after ringing the alarm.
6. The elevator is absolutely not allowed to carry people up and down.
7. After the work is finished, the hoist suspension plate should fall to the ground, then cut off the power supply, and close the upper and lower guardrail doors.
8. Always keep the environment around the vertical bucket conveyor clean.
More solutions
Batching plant bulk material transfer scheme
In batching plant systems, assembled steel silos are often required as intermediate storage containers for ingredients. Bulk materials are transported to these assembled steel silos by bulk trucks, belts, etc., and then conveyed to the weighing scales via screw conveyors, belt conveyors, etc., for mixing.
Factory Bulk Material Storage and Conveying Solutions
Factory bulk material storage and conveying solution: Raw materials arrive at the factory by bulk trucks or other means, and are conveyed to the raw material storage silo via dump-lift or compressed air. They are then transported to the metering equipment via belt conveyor or screw conveyor. After precise metering, they are mixed or bagged, and sent to the finished product storage silo via discharge equipment, or bagged for sale after packaging by an automatic packaging and palletizing machine.
Hydropower project bulk material transfer scheme
New hydropower projects are usually built in relatively remote areas, making it difficult to transport raw materials such as cement, fly ash, and sand and gravel. Large-capacity prefabricated steel plate silos are usually needed for centralized transportation, allowing for a single delivery to cover a longer period. The materials are then directly transported to the point of use via inclined belts, pneumatic conveying, and other methods.
Train Bulk Material Transfer Scheme Diagram
Bulk materials are delivered to the site by train, and then transported via pneumatic conveying/belt conveying/screw conveyors and elevators, etc., to assembled steel silos for storage. From there, they are distributed to various locations in the region by tanker trucks, or connected to a bagging machine for sale as bagged materials, or transported by truck to the point of use.
Port Bulk Material Transfer Station Solution
Bulk materials arrive at the terminal by water, and are then transported to assembled steel plate silos for storage via pneumatic conveying, belt conveying, ship unloaders, bulk truck transfer, chutes, elevators, etc. Afterwards, they are distributed throughout the region by cement tankers or connected to packaging machines for sale as bagged materials.
Mine Bulk Material Storage and Transportation Solution
Ore raw materials are transported through mining to raw material storage silos or stockyards, then transported via conveyor belts to crushing machinery (coarse crushing, fine crushing), and then transported by belt conveyors/hoists or other means to finished product storage silos or processing equipment, finally transported by truck or packaged for sale. If necessary, the crushed granular material is then ground into powder by a pulverizer and transported to the finished product warehouse, then sold via bulk trucks or after packaging.
Xiamen Luwei Prefabricated Steel Structure Co., Ltd.
Scan the code to add us on WeChat.
Zhixiang’s Video Account
Zhixiang Official Account
Xiamen Luwei Prefabricated
Steel Structure Co., Ltd Ltd.
Service Hotline:
Domestic Sales (Manager Wu): 0086 18059271069
International Sales (Manager Tina): 0086 18150889219
Email:sales@xmlwjx.com
Company registered address:
3rd Floor, Office Building, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
R&D and Manufacturing Address:
Factory, 2nd Floor, E, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
