Solution
What is the reason for the severe wear of the vertical bucket conveyor head and tail wheels
Release time:
2023-02-16 09:53
Source:
The reason for the serious wear of the vertical bucket conveyor head and tail wheels The serious wear problem is caused by the lack of lubricating oil in the head and tail wheels, using lubricating oil to reduce the friction effect between the parts, if there is a lack of lubrication, the working load of the vertical bucket conveyor is concentrated in If the two wheels are oiled, the friction will become larger, the holes connecting the sprocket and the main shaft will be severely worn, the front and rear wheels will work in an unstable state, and the lifted materials will also fall, so the front and rear wheels Wheels must be well lubricated.
The material particles conveyed by the Vertical bucket conveyor are relatively large, and the hardness is relatively high. During the operation, few materials fall from the equipment. Because the sprocket is large, the materials are easy to hit the head wheel and the tail wheel. After a long time Finally, the wheel will be deformed, so the material size of the conveyed material must match the selected bucket elevator.
The construction materials of the tail wheel and the top wheel are not suitable, the processing quality is not up to standard, and there will be troubles when using it. In addition, the top wheel and tail wheel of the Vertical bucket conveyor have great strength, and low quality will definitely cause serious wear and tear. , and the wear rate is faster, so when selecting the front and rear wheels and selecting the appropriate metal material for processing technology to produce a durable sprocket, we must accurately calculate the bearing pressure of the sprocket.
More solutions
Batching plant bulk material transfer scheme
In batching plant systems, assembled steel silos are often required as intermediate storage containers for ingredients. Bulk materials are transported to these assembled steel silos by bulk trucks, belts, etc., and then conveyed to the weighing scales via screw conveyors, belt conveyors, etc., for mixing.
Factory Bulk Material Storage and Conveying Solutions
Factory bulk material storage and conveying solution: Raw materials arrive at the factory by bulk trucks or other means, and are conveyed to the raw material storage silo via dump-lift or compressed air. They are then transported to the metering equipment via belt conveyor or screw conveyor. After precise metering, they are mixed or bagged, and sent to the finished product storage silo via discharge equipment, or bagged for sale after packaging by an automatic packaging and palletizing machine.
Hydropower project bulk material transfer scheme
New hydropower projects are usually built in relatively remote areas, making it difficult to transport raw materials such as cement, fly ash, and sand and gravel. Large-capacity prefabricated steel plate silos are usually needed for centralized transportation, allowing for a single delivery to cover a longer period. The materials are then directly transported to the point of use via inclined belts, pneumatic conveying, and other methods.
Train Bulk Material Transfer Scheme Diagram
Bulk materials are delivered to the site by train, and then transported via pneumatic conveying/belt conveying/screw conveyors and elevators, etc., to assembled steel silos for storage. From there, they are distributed to various locations in the region by tanker trucks, or connected to a bagging machine for sale as bagged materials, or transported by truck to the point of use.
Port Bulk Material Transfer Station Solution
Bulk materials arrive at the terminal by water, and are then transported to assembled steel plate silos for storage via pneumatic conveying, belt conveying, ship unloaders, bulk truck transfer, chutes, elevators, etc. Afterwards, they are distributed throughout the region by cement tankers or connected to packaging machines for sale as bagged materials.
Mine Bulk Material Storage and Transportation Solution
Ore raw materials are transported through mining to raw material storage silos or stockyards, then transported via conveyor belts to crushing machinery (coarse crushing, fine crushing), and then transported by belt conveyors/hoists or other means to finished product storage silos or processing equipment, finally transported by truck or packaged for sale. If necessary, the crushed granular material is then ground into powder by a pulverizer and transported to the finished product warehouse, then sold via bulk trucks or after packaging.
Xiamen Luwei Prefabricated Steel Structure Co., Ltd.
Scan the code to add us on WeChat.
Zhixiang’s Video Account
Zhixiang Official Account
Xiamen Luwei Prefabricated
Steel Structure Co., Ltd Ltd.
Service Hotline:
Domestic Sales (Manager Wu): 0086 18059271069
International Sales (Manager Tina): 0086 18150889219
Email:sales@xmlwjx.com
Company registered address:
3rd Floor, Office Building, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
R&D and Manufacturing Address:
Factory, 2nd Floor, E, No. 608, Xinxi South Road, Xinxu Town, Xiang'an District, Xiamen City
