Product Center
Arch breaking of flow-assisting nozzle
The front part of the powder breaking arch nozzle is made of porous metal. The high-pressure air introduced from the outside is evenly dispersed around the nozzle after passing through the nozzle, promoting the flow of powder and achieving a fluidizing effect.
Category:
- Product Description
- 3D drawing
-
Function Introduction:
The front part of the powder breaking arch nozzle is a porous metal. The high-pressure air introduced from the outside is evenly dispersed around the nozzle after passing through the nozzle, promoting the flow of powder and achieving the effect of assisting the flow.
Application Introduction:
The flow-assisting nozzle is an arch-breaking and flow-assisting device that is easy to install and has a wide range of applications. It can be installed on hoppers, silos, and especially pipelines.
Installation Instructions:
1. Drill a φ36 hole at the easily blocked part of the hopper or pipeline;
2. Weld the connector to the hole;
3. Solidify the nozzle on the connector;
4. Connect a 1/4” quick connector to the other end;
5. Connect to a 0.2bar air source, and the nozzle will work. -

Downloads