The vertical bucket elevator has the advantages of large conveying capacity, high lifting height, stable and reliable operation, and long service life. The elevator is suitable for vertical conveying of various powder, fine-grained and coarse-grained materials. It can be widely used in feed, flour, food and chemical industries such as: coal, cement, stone, sand, clay, ore, etc. The general conveying height can reach up to 80 meters.

How the vertical bucket elevator works:
The hopper scoops up the material from the storage below, lifts to the top with the conveyor belt or chain, bypasses the top wheel and turns down, and the vertical bucket elevator pours the material into the receiving tank. The transmission belt of the bucket elevator with transmission is generally a rubber belt, which is installed on the lower or upper driving roller and the upper and lower redirecting roller. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of drive sprockets on the top or bottom, and a pair of redirection sprockets on the bottom or top. Bucket elevators are generally equipped with a casing to prevent dust from flying in the bucket elevator.
The vertical bucket elevator is suitable for elevating from a low place to a high place. After the supply material is put into the hopper through the vibrating table, the machine will automatically and continuously run and be transported upward.