Bucket elevator belt manufacturers tell you that with the gradual development of the industry, bucket elevators are used for material conveying in many industries, such as food, machinery parts, chemical industry, etc.all need to use bucket elevators to convey materials, but The accessories of the elevator will also be damaged. Today, Xiaobian will share with you how to replace the Bucket elevator belt!

1. The Bucket elevator belt manufacturer tells you to first transport the new belt to the rear of the bucket elevator, open the rear observation ports on both sides of the bucket elevator, and break the old belt from the tail wheel of the bucket elevator through one of the rear observation ports. open.
2. Connect the prepared new belt of the bucket elevator to the corresponding broken end of the old belt at the rear observation port of the elevator, and then start the cranking at the first wheel of the bucket elevator until the old belt is observed from the other end. After all the ports are output, disconnect the connection between the new belt and the old belt.
3. Finally, connect the two broken ends of the new belt. The beneficial effect of the invention is that the belt of the bucket elevator is replaced by the method of manual turning, avoiding the process of removing the shield at the first wheel of the bucket elevator. The Bucket elevator belt manufacturer tells you that the whole process is simple and easy to operate, The safety factor is high, the replacement time is short, and the normal production is not affected.