The application of bucket elevator for cement plant is very special. It is used to vertically lift limestone, coal, gypsum, clinker, dry clay and other bulk and granular materials and powdered materials such as raw meal, cement, and coal powder that pass through the crusher. The following bucket elevator for cement plant manufacturers will take you to understand its characteristics.

Main features of bucket elevator for cement plant:
1. Bucket elevator for cement plant has low drive power, adopts inflow feeding, induced discharge, and dense arrangement of large-capacity hoppers. There is almost no return and digging phenomenon when materials are lifted, so the ineffective power is low.
2. Lifting, bucket elevator for cement plant has less requirements on the types and characteristics of materials. It can not only improve general powdery and small granular materials, but also improve materials with high abrasiveness, with good sealing performance and less environmental pollution.
3. Good operation reliability, high lifting height, and trouble-free operation time can exceed 20,000 hours. Long service life, the feeding of the bucket elevator for cement plant adopts the inflow type, and the machine is designed to ensure that the material is less scattered during feeding and unloading, which reduces mechanical wear.
According to the speed of the hopper, the bucket elevator for cement plant can be divided into three forms: centrifugal unloading, gravity unloading and mixed unloading.
The bucket elevator for cement plant manufacturer tells you that the bucket speed of centrifugal unloading is faster, which is suitable for conveying powder, granular, small block and other materials with small abrasiveness; the bucket speed of gravity unloading is slower, which is suitable for conveying Massive, heavy and abrasive materials, such as limestone, clinker, etc.