Generally speaking, for the use of chain type bucket elevator, the civil construction on the construction site is basically completed, the on-site garbage cleaning is completed, there is no dust and other pollution, and the ventilation is good. If necessary, an exhaust fan can be used for forced ventilation.

The chain type bucket elevator manufacturer tells you that the on-site lighting must meet the needs of the construction, the use of mobile lighting fixtures and sun lights is prohibited, and the safety warning red lights should be set up at night in dangerous places. The handheld must be a safe voltage light source. Strengthen the erection and inspection of safety facilities before installation, weld safety piles, pull safety ropes, and pull safety nets at necessary parts.
The chain type bucket elevator manufacturer tells you that it is necessary to strengthen the education on the correct use of safety helmets by construction workers, carry out necessary rewards and punishments, and do a good job of conspicuous identification and strict protective measures for the edge of the hole. Trial operation, after the installation is completed, the empty vehicle trial operation should be carried out. Attention should be paid to the idling operation: it cannot be reversed or bumped. The chain type bucket elevator manufacturer tells you that the idle operation is not less than 2 hours, there should be no overheating, the temperature rise of the bearing should not exceed 250℃, and the temperature rise of the reducer should not exceed 300℃. After 2 hours of empty operation, the load test can be carried out when everything is normal. During the test run with load, the feeding should be uniform to prevent excessive feeding and blockage of the lower part.