Recently, a customer asked that the bucket elevator for cement plant always has noise problems, which is annoying. Now I would like to explain the reason why the bucket elevator for cement plant produces noise. It often makes abnormal noise due to the abnormal operation of a certain component. The main parts of the noise are the coupling, the lifting head wheel and the bottom wheel, and the inside of the lifting barrel.

1. Abnormal noise of the coupling: The abnormal noise emitted by the coupling is sometimes accompanied by vibration noise with the same frequency as the motor's rotation. The bucket elevator for cement plant manufacturer tells you that the main reason for the failure is that the front and rear shafts of the coupling are not concentric. The position of the motor and the reducer should be adjusted in time to ensure that the motor shaft and the reducer shaft are concentric.
2. Abnormal noise of head wheel and bottom wheel: The bucket elevator for cement plant manufacturer tells you that the noise of the head wheel and bottom wheel is very small when they work normally. When abnormal noise occurs, the bearing is damaged due to poor sealing or lubrication. issued. Carefully check the bearing condition of the head wheel and the bottom wheel, if the bearing is damaged, it should be replaced in time.
3. Abnormal noise in the barrel: The main reason for abnormal noise in the barrel is that the hopper is falling off, damaged or loose. In this case, stop immediately, carefully inspect and repair the hopper that is fallen off, damaged or loose. In the daily work, every 500 hours of work of the bucket elevator for cement plant, a comprehensive inspection is carried out to check whether the hopper is in good condition and whether the connection between the hopper and the hopper belt is firm, so as to ensure the stability of the hopper. At the same time, a fence can be installed at the discharge port of the bucket elevator for cement plant to prevent damage to other equipment after the bucket falls off.