The cement bucket elevator always has noise problems, which makes people feel annoyed. Now, let me explain to you why the cement bucket elevator produces noise. It often makes abnormal noises due to abnormal operation of certain components. The main part of the abnormal noise is the coupling. , Lifting head wheel and bottom wheel, inside of the lifting barrel, etc.

1. Abnormal noise of the coupling: The cement bucket elevator manufacturer tells you that the abnormal noise from the coupling is sometimes accompanied by vibration and noise with the same frequency as the motor's rotation. The main reason for this failure is that the front and rear shafts of the coupling are not concentric. The cement bucket elevator manufacturer tells you that you should adjust the position of the motor and reducer in time to ensure that the motor shaft and the reducer shaft are concentric.
2. Abnormal noise of the head wheel and bottom wheel: The cement bucket elevator manufacturer tells you that the noise of the head wheel and bottom wheel is very small during normal operation. When abnormal noise occurs, the bearing is damaged due to poor sealing or lubrication, which is caused by the bearing seat. . Check the bearing conditions of the head wheel and bottom wheel carefully. If the bearings are damaged, they should be replaced in time.
3. Abnormal noise in the barrel: The cement bucket elevator manufacturer tells you that the main reason for the abnormal noise in the barrel is the falling, damage or looseness of the hopper. In this case, stop immediately, carefully inspect and repair the falling, damaged or loose hopper. In daily work, the cement bucket elevator checks whether the hopper is intact and whether the hopper and the hopper belt are firmly connected every 500 hours of work to ensure the stability of the hopper. At the same time, a fence can be installed at the discharge opening of the cement bucket elevator to prevent damage to other equipment after the hopper falls off.