The vertical bucket elevator consists of a casing, a traction part (conveyor chain), a hopper, a driving wheel (head wheel), a redirection wheel (tail wheel), a tensioning device, a guiding device, a feeding port (feeding port) and a discharging port ( discharge port).

The vertical bucket elevator is suitable for lifting from a low place to a high place. After the supply material is put into the hopper through the vibrating table, the machine will automatically run continuously and transport it upwards.
How the vertical bucket elevator works:
The hopper scoops up the material from the storage below, lifts it to the top with the conveyor belt or chain, turns down after bypassing the top wheel, and the vertical bucket elevator dumps the material into the receiving tank. The drive belt of the vertical bucket elevator with drive generally adopts a rubber belt, which is installed on the lower or upper drive roller and the upper and lower redirecting rollers. The chain-driven vertical bucket elevator is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on the top or bottom, and a pair of redirecting sprockets on the bottom or top. Vertical bucket elevators are generally equipped with casings to prevent dust from flying in vertical bucket elevators.